Blog

2017 Spectrum CAD Model - "Gamma Ray"Our main sheet metal order for our robot has been sent over to our wonderful sponsor Solarcraft Inc. So that means are robot CAD is…

This week, we’re featuring Adrienne Emerson, an important mentor to many students and the community. Her love for engineering began in high school when she joined her school’s robotics team.…

Here is are nearly finished drive train and bumpers CAD.There are still some big issues with the robot to be worked out but we are also working through some small…

Our programming team has started getting our autonomous running on our 2014 practice robot. We are using a very similar drive train to that year so it makes it simple…

Check_in Watch our full segment on check_in here and be sure to watch the live show every Tuesday at 6 CT on RoboSports NetworkSpectrum Master SheetSam Skoglund from FRC#2232 posted about…

This is our prototype sheetmetal drive train and intake. It's actually one of the most cleanly wired robots we have built, mostly because the large center rail hides all the…

We are now officially in to the 2nd third of the season. Teams should be rounding out their ideas and prototypes and getting heavy in to their designs.We flushed out…

Week 2 has come to an end. We built a test hopper to make sure our ball count numbers were reasonable. We were able to fit 70 balls in the…

Spectrum Week 2 Video UpdatesRecap Video Full Time Lapse  check_inBe sure to watch our segment of check_in from this Tuesday's showNew live episodes air every Tuesday at 6 CT (7ET) on the RoboSports…

Here is a portion of the CAD we have done for the robot. The drive train and a portion of the intake will get their Rev 1 versions sent to…