What’s in the box? – Pneumatic Fittings Case

As we organize our lab in preparation for the 2018 FRC Game Power Up. We are going to detail what we keep in all our cases and bins. Every team has their own way of organizing things but we feel like giving teams an example would be helpful. If you have a system or tip that you think might help us let us know in the comments.

We are going to kick this off with our “Pneumatic Fittings Case”. Freshly organized after purchasing new 5/32″ tube fittings to use where we don’t need the air flow ability of 1/4″ tube. 5/32″ tube is smaller and easier to route through the robot.

1. 10-32 to 1/4″ Tube Elbow
2. 1/4″ Tube coupler
3. inline regulator & flow controls
4. 1/8″ NPT to 1/4″ Tube
5. 1/8″ NPT to 1/4″ Tube Elbow
6. 1/4″ Plug
7. 10-32 to 1/4″ Tube Straight
8. 1/8″ NPT to 1/4″ Flow Control
9. NPT couplers
10. 1/8″ NPT Plugs
11. Pressure Relief Valves & noise reducers
12. 1/4″ female to 1/8″ female NPT reducer
13. 1/4″ T- Fittings
14. Miscellaneous
15. NPT T Fittings
16. Tubing Cutter
17. 1/4″ Plugs
18. 1/8″ NPT Female to 1/4″ Tube T-Fitting
19. 1//4″ to 5/32″ Tube Fitting
20. 5/32″ Inline Flow Control
21. 5/32″ Plugs
22. 1/8″ NPT to 5/32″ Tube Straight
23. 10-32 to 5/32″ Tube Elbow
We need to find a place for a roll of teflon tape, as well as add in the 5/32″ T-Fittings when we get those in.

– Spectrum
“For every minute spent organizing, an hour is earned. ~ Benjamin Franklin”
Source: Spectrum